Ref Smart College Baseball, Football, and Lacrosse Action Clock Timer

RST1

Honig's

Shipping calculated at checkout.

The timer has been updated for 2025 SEASON

Product Details

Configures to time college softball or college baseball
Easy to use in all weather conditions. Unlike a wrist watch there are no tiny buttons
Updated for the NCAA Softball & Baseball Timing Rules
Simple click toggle switch
3 1/4" x 2 3/8" x 1 1/16"

Softball Pitch Clock

Softball Between Innings Clock

Baseball Pitch Clock Timer (Updated for 2025)

Baseball Between Innings Timer

Timer Instructions

Unless otherwise indicated, by default the timer is set for football (25/40). Follow the instructions below to set for other sports.

Changing The Timer Function
Remove the lid (a flat head screw driver works best)

Make sure the power switch is off
Inside you will see the small DIP switches just above the power switch
Switch 1 controls audible/silent. To the left is vibrate only, to the right is audible tone and vibrate.
To move the switches use a pen or paperclip and move the switch.
After changing the switches, turn the power on, then off, then back on
The timer is now ready to use

Use the Following Configurations (Note: Switch 1 is closest to the bottom)

Football 25/40 (Silent) - Switch 2 to the right, all others left
Lacrosse 20/120 (Audible) Switches 1 & 3 to the right, all others to the left
Baseball 20/120 (Silent) Switches 2&3 to the right, all others to the left
College Softball 20/90 (Silent) Switch 1 to the left (toward the batteries), Switches 2,3,4 to the right (toward the toggle).

Using the Timer

Slide the power switch to on. If the timer makes a “siren” sound at power-up it is time to change the battery.
Flip the toggle switch up to start the longer timer or down to start the shorter timer. The device will vibrate quickly so you know that timer has started.
When the time reaches 0:00 it will vibrate continuously for 5 seconds or until the toggle is switched to the center position.
The timer is reset every time you toggle to the center position.

Changing the Battery

Tips for Use

In case you forget to turn the power off, the timer will automatically shut off if unused for 30 minutes.
If this happens just switch the power switch off, then back on again.
REF SMART IS NOT RESPONSIBLE FOR WATER DAMAGE. As a precaution in heavy rain we recommend covering it with a bag to ensure it stays dry.

Warnings and Vibrations

Both Timers: Warning Vibration with 10 seconds remaining. Then 5 quick vibrations to count down the last 5 seconds. Continuous vibration at 0:00.
40 second timer has a vibration with 25 seconds remaining

20 Second Timer: Warning vibration with 8 seconds remaining. Continuous vibration (lasting 5 seconds) when the timer has reached 20 seconds
120 Second Timer: Warning vibration with 30 seconds remaining and with 15 seconds remaining. Continuous vibration at 0:00.

20 Second Timer: Continuous and Audible Tone with Vibration when the timer reaches 0:00
120 Second Timer: Audible Tone and Vibration with 20 seconds remaining. Continuous Audible Tone and Vibration when the timer reaches 0:00.

There are 6 vibrations. Starting with the first vibration, you should count backwards as: Five, Four, Three, Two, One, Zero. The timer has expired when you reach Zero.

Ref Smart College Baseball, Football, and Lacrosse Action Clock Timer